6 Best Alternatives to the GLOTRENDS PA17 PCIe 5.0 x16 (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The GLOTRENDS PA17 is a straight PCIe 5.0 x16 riser designed for 1U and 2U rack servers. It provides a 200mm lift to clear drive cages and adjacent components. If you are looking for glotrends pa17 pcie 5 0 x16 alternatives, you might need different angles or lengths. The original card does not support hot-plugging, which limits flexibility during installation. You may also prefer a different brand for specific case compatibility.
This list features 6 options chosen because their specs overlap with the original. Some alternatives offer right-angle designs for mid-tower builds. Others provide shorter cables for ITX systems. You can find PCIe 4.0 and 3.0 options if you do not need Gen5 bandwidth. Each product in this selection addresses a specific physical constraint or interface requirement. You can compare the interface versions and physical dimensions to find the right fit. These alternatives maintain the core function of signal pass-through. They simply adapt the connection to your specific hardware layout.
Our top pick: Glotrends PA17 Straight PCIe 5.0 Riser.
How these alternatives compare
GLOTRENDS 200mm Right-Angle PCIe 4.0 Riser Cable
The GLOTRENDS 200mm Right-Angle PCIe 4.0 Riser Cable uses a PCIe 4.0 interface instead of PCIe 5.0. This means you get lower maximum bandwidth, but the link remains stable with older CPUs like Ryzen 5000 or Intel 11th Gen. It features a right-angle design for mid-tower cases, whereas the PA17 is straight for rack servers. The cable is 200mm long and weighs 4.97 ounces, making it heavier than the 1.76-ounce PA17. Choose this if you need PCIe 4.0 stability in a standard desktop build rather than high-speed Gen5 performance for a server.
GLOTRENDS 250mm PCIe 3.0 x16 90-Degree Riser Cable
This GLOTRENDS 250mm PCIe 3.0 x16 90-Degree Riser Cable drops to the PCIe 3.0 standard, offering significantly less bandwidth than the PA17. It is designed for full-tower builds with older GPUs that do not benefit from Gen5 speeds. The 250mm length provides extra clearance compared to the 200mm PA17, and the 90-degree angle suits different case layouts. It lacks the 1U/2U low-profile form factor of the PA17. Select this option if you are upgrading an older system where maximum throughput is not the priority, and you need a longer cable for tight spaces.
LINKUP 25cm Right Angle PCIe 5.0 Riser Cable
The LINKUP 25cm Right Angle PCIe 5.0 Riser Cable matches the PA17 with full PCIe 5.0 bandwidth but uses a right-angle connector for vertical GPU mounts. At 25cm, it is shorter than the 200mm PA17, fitting compact cases better. It weighs 5.29 ounces, which is heavier than the lightweight PA17. Unlike the PA17, this cable requires you to source your own brackets for installation. It is ideal for builders who need high-speed Gen5 performance in a vertical setup within a tight space, rather than a straight riser for a rack server.
LINKUP 19cm Double Reverse PCIe 5.0 Riser Cable
The LINKUP 19cm Double Reverse PCIe 5.0 Riser Cable supports PCIe 5.0 but is specifically designed for ITX builds with double reverse angles. At 19cm, it is much shorter than the 200mm PA17, making it suitable for small form factor cases. It lacks the straight angle and 1U/2U rack compatibility of the PA17. This riser is best for ITX users who need a specific angle for vertical GPU mounting. If you are building a standard ATX or server setup, the PA17 is a better fit. Choose this only if your case requires a double reverse angle configuration.
LINKUP 10cm Straight PCIe 5.0 Riser Cable
The LINKUP 10cm Straight PCIe 5.0 Riser Cable offers PCIe 5.0 bandwidth in a very compact 10cm length. This is significantly shorter than the 200mm PA17, making it ideal for tight vertical mounts in ITX cases. It shares the straight angle of the PA17 but is not designed for 1U/2U rack servers. The shorter length limits its use to cases with very close proximity between the motherboard and GPU. Pick this option if you need a short, high-speed connection for a compact build, rather than the extended clearance provided by the 200mm PA17.
GLOTRENDS 150mm PCIe 5.0 Riser Cable
The GLOTRENDS 150mm PCIe 5.0 Riser Cable provides full PCIe 5.0 bandwidth like the PA17 but uses a different form factor. At 150mm, it is shorter than the 200mm PA17, making it suitable for mid-tower cases with vertical GPU mounts. It lacks the 1U/2U low-profile design of the PA17. This cable is better for desktop builders who need a reliable vertical mount solution. If you are using a rack server or need the extra 50mm of lift, the PA17 is the correct choice. Otherwise, this 150mm option offers a compact Gen5 alternative for standard desktops.
Quick picks
Our 7 picks
Glotrends PA17 Straight PCIe 5.0 Riser
Best for: 1U/2U rack servers needing 200mm lift
- Interface Standard
- PCIe 5.0
- Slot Configuration
- x16
- Connector Angle
- Straight Angle
- Weight
- 1.76 ounces
View on Amazon: Glotrends PA17 Straight PCIe 5.0 Riser Affiliate link
The GLOTRENDS PA17 is a straight-angle PCIe 5.0 x16 riser adapter card designed for 1U or 2U rack servers. It raises your motherboard slot by 200mm to clear shrouds and drive cages. The card passes signals straight through without enhancement. It supports backward compatibility with PCIe 4.0 and 3.0 devices. You get full bandwidth only if your CPU, motherboard, and GPU all support PCIe 5.0. It weighs 1.76 ounces.
Pros
- Passes PCIe 5.0 x16 signals straight through
- 200mm slot height clears adjacent components
- Backward compatible with PCIe 4.0 and 3.0
- Low-profile option for 1U/2U rack servers
Cons
- Requires all system components to support PCIe 5.0 for full speed
- No hot-plugging support; must power off before installation
- Pure signal pass-through does not enhance weaker signals
Good fit if
- You need a straight-angle riser for a 1U or 2U rack server
- You require a 200mm lift to clear drive cages or shrouds
- You have a full PCIe 5.0 system for maximum bandwidth
Skip if
- You need hot-plugging capability for live changes
- You are using a PCIe 4.0 or 3.0 system and need speed upgrades
- You require a right-angle or left-angle connection style
Verdict: The GLOTRENDS PA17 PCIe 5.0 Riser fits users who need a straight, low-profile riser for 1U or 2U rack servers with full PCIe 5.0 support.
GLOTRENDS 200mm Right-Angle PCIe 4.0 Riser Cable
Best for: mid-tower builds needing PCIe 4.0 stability
- Interface Standard
- PCIe 4.0
- Slot Configuration
- x16
- Cable Length
- 200mm
- Connector Angle
- 90 Degree Right Angle
- Maximum Bandwidth
- 32GB/s
- Shielding Type
- foil-wrapped
View on Amazon: GLOTRENDS 200mm Right-Angle PCIe 4.0 Riser Cable Affiliate link
This GLOTRENDS riser cable offers a 200mm right-angle connection for PCIe 4.0 x16 slots. It delivers up to 32GB/s bandwidth using shielded 30AWG silver-plated copper. The design fits standard mid-towers, providing slack for routing behind the motherboard tray. It works with Intel 11th Gen and Ryzen 5000 CPUs. You get stable signals for 4K or 8K output without needing drivers or external power.
Pros
- PCIe 4.0 x16 interface with up to 32GB/s bandwidth
- 200mm length ideal for mid-tower cases
- Individually foil-wrapped shielding for EMI protection
- Backward compatible with PCIe 3.0 slots
Cons
- Only supports PCIe 4.0, not PCIe 5.0
- Hot swapping is not supported
- Requires a CPU-direct PCIe slot for full speed
Good fit if
- You need a 200mm right-angle cable for a mid-tower case
- You want PCIe 4.0 bandwidth without extra power cables
- You have an Intel 11th Gen or Ryzen 5000 CPU
Skip if
- You require PCIe 5.0 support for next-gen GPUs
- You need to hot swap the card while the system is on
- Your GPU connects to a chipset slot rather than the CPU
Verdict: GLOTRENDS 200mm PCIe 4.0 Riser is a solid choice for users with mid-tower cases who need reliable PCIe 4.0 performance. It suits builders with Ryzen 5000 or Intel 11th Gen processors who prioritize signal stability over the latest PCIe 5.0 standard.
GLOTRENDS 250mm PCIe 3.0 x16 90-Degree Riser Cable
Best for: Full-tower builds with PCIe 3.0 GPUs
- Interface Standard
- PCIe 3.0
- Slot Configuration
- x16
- Cable Length
- 250mm
- Connector Angle
- 90 Degree Right Angle
- Maximum Bandwidth
- 16GB/s
- Shielding Type
- EMI Shielded
View on Amazon: GLOTRENDS 250mm PCIe 3.0 x16 90-Degree Riser Cable Affiliate link
This is a 250mm PCIe 3.0 x16 GPU riser cable with a 90-degree right angle. It provides up to 16GB/s bandwidth and uses EMI-shielded ribbon design for signal stability. The cable fits full-tower cases and supports backward compatibility with older slots. It is ideal for users with Gen 3 graphics cards who need extra length and reliable connection without external power.
Pros
- 250mm length for full-tower chassis
- PCIe 3.0 x16 interface
- EMI-shielded ribbon design
- 90-degree right angle connector
Cons
- Lower bandwidth than PCIe 4.0 or 5.0 alternatives
- Hot swapping not supported
- Requires BIOS adjustment for PCIe 4.0 GPUs
Good fit if
- You have a full-tower case with distant GPU mounts
- You use PCIe 3.0 compatible graphics cards
- You need a 90-degree right angle connection
Skip if
- You require PCIe 4.0 or 5.0 speeds
- You need hot swapping capability
- You prefer a straight angle layout
Verdict: GLOTRENDS 250mm PCIe 3.0 Riser is a practical solution for full-tower builds using older generation GPUs. It delivers stable performance for users who prioritize length and angle over maximum bandwidth.
LINKUP 25cm Right Angle PCIe 5.0 Riser Cable
Best for: vertical GPU mounts in tight spaces
- Interface Standard
- PCIe 5.0
- Slot Configuration
- x16
- Cable Length
- 25cm
- Connector Angle
- Right Angle
- Maximum Bandwidth
- 128GB/s
- Shielding Type
- multilayer shielding
View on Amazon: LINKUP 25cm Right Angle PCIe 5.0 Riser Cable Affiliate link
This LINKUP riser cable connects your GPU vertically using a PCIe 5.0 x16 interface. It delivers 128GB/s bandwidth with multilayer shielding to reduce interference. The right-angle connector fits tight spaces in ITX or server builds. At 25cm, it bridges the gap between motherboard and card. You get stable signal integrity for high-end graphics cards and AI workloads.
Pros
- PCIe 5.0 x16 interface with 128GB/s bandwidth
- Right-angle connector for vertical GPU mounting
- Multilayer shielding suppresses crosstalk and EMI
- Compatible with standard and SFF case layouts
Cons
- 25cm length may not reach all chassis configurations
- Requires separate standoffs and support brackets
- No included mounting hardware for vertical display
Good fit if
- You need a vertical GPU mount for your build
- You want PCIe 5.0 bandwidth for future cards
- You have space for a 25cm extension route
Skip if
- You require a straight connector for your layout
- You need a cable shorter than 25cm
- You prefer PCIe 4.0 or older standards
Verdict: LINKUP PCIe 5.0 Right Angle Riser 25cm suits builders who need high-speed vertical mounting in compact cases. It offers reliable Gen5 performance but requires you to source your own brackets for installation.
LINKUP 19cm Double Reverse PCIe 5.0 Riser Cable
Best for: ITX vertical GPU mounts with double reverse angle
- Interface Standard
- PCIe 5.0
- Slot Configuration
- x16
- Cable Length
- 19cm
- Connector Angle
- Double Reverse
- Maximum Bandwidth
- 128GB/s
- Shielding Type
- multilayer shielding
View on Amazon: LINKUP 19cm Double Reverse PCIe 5.0 Riser Cable Affiliate link
This LINKUP riser cable supports PCIe 5.0 x16 with a maximum bandwidth of 128GB/s. The 19cm double reverse connector fits vertical GPU mounts in ITX and SFF cases. It uses multilayer shielding to reduce interference. The design works with standard layouts and open benches. It suits builders who need a specific cable angle for tight chassis routes.
Pros
- Supports PCIe 5.0 x16 interface standard
- Delivers 128GB/s maximum bandwidth
- Double reverse connector angle for vertical mounts
- Multilayer shielding for signal integrity
Cons
- 19cm length may be too short for some case layouts
- Requires measuring from motherboard slot to GPU PCB
- Uses standoffs and support brackets if chassis requires them
Good fit if
- You need a double reverse angle for vertical GPU mounting
- You are building in an ITX or SFF case
- You want PCIe 5.0 bandwidth for future cards
Skip if
- You require a straight or right angle connector
- You need a cable longer than 19cm
- You are using a standard tower without vertical mounting
Verdict: LINKUP 19cm PCIe 5.0 Double Reverse Riser fits ITX builders who need a specific double reverse angle for vertical GPU mounts. It provides PCIe 5.0 bandwidth in a compact 19cm length.
LINKUP 10cm Straight PCIe 5.0 Riser Cable
Best for: Compact ITX vertical GPU mounts
- Interface Standard
- PCIe 5.0
- Slot Configuration
- x16
- Cable Length
- 10cm
- Connector Angle
- Straight
- Maximum Bandwidth
- 128GB/s
- Shielding Type
- multilayer shielding
View on Amazon: LINKUP 10cm Straight PCIe 5.0 Riser Cable Affiliate link
This LINKUP AVA5 v2 cable provides a straight PCIe 5.0 x16 connection for vertical GPU mounting. It supports 128GB/s bandwidth with multilayer shielding to reduce interference. The 10cm length fits small form factor cases or tight ITX layouts. You get a black cable that works with standard tower and open bench setups. It is ideal for builders needing a short, direct link between the motherboard and a vertically mounted graphics card.
Pros
- Supports full PCIe 5.0 x16 bandwidth of 128GB/s
- Straight connector angle for direct vertical mounting
- Multilayer shielding reduces crosstalk and EMI
- Backward compatible with PCIe 4.0 and 3.0 devices
Cons
- 10cm length is very short for standard ATX cases
- Straight angle limits routing flexibility in crowded builds
- Includes support brackets but requires separate standoffs
Good fit if
- You are building a compact ITX or SFF system
- You need a direct vertical GPU mount with minimal bend
- You want PCIe 5.0 speeds in a small space
Skip if
- You have a standard ATX case with long distances
- You need a right-angle connector for tight corners
- You require a cable longer than 10cm
Verdict: LINKUP PCIe 5.0 10cm Straight Riser is a high-speed solution for tight vertical mounts. It fits ITX builders who need short, direct connections with full Gen5 bandwidth.
GLOTRENDS 150mm PCIe 5.0 Riser Cable
Best for: Vertical GPU mounts in mid-tower cases
- Interface Standard
- PCIe 5.0
- Slot Configuration
- x16
- Cable Length
- 150mm
- Connector Angle
- 90 Degree Right Angle
- Maximum Bandwidth
- 64GB/s
- Shielding Type
- individually foil-wrapped
View on Amazon: GLOTRENDS 150mm PCIe 5.0 Riser Cable Affiliate link
This GLOTRENDS riser cable offers a 150mm length with a 90-degree right-angle connector, designed for vertical GPU mounting in mid-tower cases. It supports PCIe 5.0 x16 bandwidth up to 64GB/s and includes a 40-pin connector for stable power delivery. The shielded design ensures signal integrity for high-resolution outputs. It fits standard mid-tower builds where a CPU-direct slot is accessible.
Pros
- 150mm length ideal for vertical mounts in mid-tower cases
- 90-degree right-angle connector for tidy routing
- Supports PCIe 5.0 x16 with up to 64GB/s bandwidth
- 40-pin connector delivers up to 78W for flagship GPUs
- Individually foil-wrapped shielding for enhanced signal integrity
Cons
- Limited to 150mm length, restricting case compatibility
- Requires a CPU-direct PCIe 5.0 x16 slot
- No external power adapter included for the 40-pin connector
Good fit if
- You are mounting a GPU vertically in a mid-tower case
- You need a 90-degree right-angle connector for cable management
- You have a CPU-direct PCIe 5.0 x16 slot available
Skip if
- You require a longer cable for deep case layouts
- Your motherboard only has chipset PCIe slots
- You need a straight connector for horizontal mounting
Verdict: GLOTRENDS 150mm PCIe 5.0 x16 Riser is a solid choice for users with mid-tower cases and CPU-direct slots who need a reliable vertical mount solution. It delivers full PCIe 5.0 bandwidth and stable power for modern GPUs.
Specifications side by side
| Spec | Glotrends PA17 Straight PCIe 5.0 Riser | GLOTRENDS 200mm Right-Angle PCIe 4.0 Riser Cable | GLOTRENDS 250mm PCIe 3.0 x16 90-Degree Riser Cable | LINKUP 25cm Right Angle PCIe 5.0 Riser Cable | LINKUP 19cm Double Reverse PCIe 5.0 Riser Cable | LINKUP 10cm Straight PCIe 5.0 Riser Cable | GLOTRENDS 150mm PCIe 5.0 Riser Cable |
|---|---|---|---|---|---|---|---|
| Interface Standard | PCIe 5.0 | PCIe 4.0 | PCIe 3.0 | PCIe 5.0 | PCIe 5.0 | PCIe 5.0 | PCIe 5.0 |
| Slot Configuration | x16 | x16 | x16 | x16 | x16 | x16 | x16 |
| Cable Length | not stated | 200mm | 250mm | 25cm | 19cm | 10cm | 150mm |
| Connector Angle | Straight Angle | 90 Degree Right Angle | 90 Degree Right Angle | Right Angle | Double Reverse | Straight | 90 Degree Right Angle |
| Maximum Bandwidth | not stated | 32GB/s | 16GB/s | 128GB/s | 128GB/s | 128GB/s | 64GB/s |
| Shielding Type | not stated | foil-wrapped | EMI Shielded | multilayer shielding | multilayer shielding | multilayer shielding | individually foil-wrapped |
| GPU | not stated | GeForce RTX 4090 | not stated | not stated | not stated | not stated | not stated |
| Interface | PCIe 5.0 | PCIe 4.0 | PCIe 3.0 | PCIe 4.0 | PCIe 4.0 | PCIe 4.0 | PCIe 5.0 |
| Form Factor | not stated | not stated | not stated | not stated | ITX | not stated | not stated |
| Weight | 1.76 ounces | 4.97 ounces | not stated | 5.29 ounces | not stated | not stated | not stated |
| Dimensions | not stated | 9.84 × 4.72 × 4.72 inches | not stated | not stated | not stated | not stated | not stated |
| Model | PA17 | PCIE40-X16-200MM-0090D | PCIE30-X16-250MM-0090D | AG-P5-33SR-025BK | AVA5 | AVA5 v2 | PCIE50-X16-150MM-0090D-Black |
| Size | not stated | 200mm | 250mm | 25cm - v4 | 19cm - v2 | 10cm - v2 | 150mm |
| Color | not stated | Black | Black | All Black | Black | Black | Black |
Frequently asked questions
Can I use a PCIe 4.0 riser with a PCIe 5.0 motherboard?
Yes, you can use a PCIe 4.0 riser on a PCIe 5.0 motherboard. The GLOTRENDS 200mm Right-Angle PCIe 4.0 Riser Cable works with older CPUs like Ryzen 5000 or Intel 11th Gen. It offers stable performance, though you will not get the maximum bandwidth available with PCIe 5.0 standards.
What is the difference between a straight and right-angle riser?
A straight riser extends directly from the slot, while a right-angle riser bends 90 degrees. The GLOTRENDS PA17 is a straight riser for rack servers. In contrast, options like the LINKUP 25cm Right Angle PCIe 5.0 Riser Cable are designed for vertical GPU mounts in tight spaces, allowing better cable management in mid-tower cases.
Are PCIe 5.0 risers backward compatible with PCIe 3.0 cards?
Yes, PCIe 5.0 risers are backward compatible. You can use a PCIe 5.0 riser with a PCIe 3.0 graphics card. However, the connection will run at the lower speed of the card. For older GPUs, the GLOTRENDS 250mm PCIe 3.0 x16 90-Degree Riser Cable is a practical solution that matches the generation.
Which riser is best for ITX builds with vertical mounts?
For ITX builds, the LINKUP 19cm Double Reverse PCIe 5.0 Riser Cable is a top choice. It features a specific double reverse angle designed for vertical GPU mounts in compact cases. It provides full PCIe 5.0 bandwidth in a short 19cm length, making it ideal for small form factor builders who need specific angles.
Do I need extra brackets for the LINKUP risers?
Some LINKUP risers require you to source your own brackets for installation. The LINKUP 25cm Right Angle PCIe 5.0 Riser Cable specifically notes that you must provide your own brackets. This is important to check before buying, as it affects the total setup requirements for your vertical GPU mount in compact cases.
How long is the GLOTRENDS 150mm PCIe 5.0 riser cable?
The GLOTRENDS 150mm PCIe 5.0 Riser Cable is 150mm long. It is a solid choice for users with mid-tower cases and CPU-direct slots. It delivers full PCIe 5.0 bandwidth and stable power for modern GPUs in vertical mount configurations. The black color and specific model ensure it fits standard build layouts.
Can I use a riser cable instead of a direct slot connection?
Yes, you can use a riser cable to connect a GPU to the motherboard. This is useful for vertical mounts or when the GPU is too large for the case. Options like the GLOTRENDS 150mm PCIe 5.0 Riser Cable provide full bandwidth. They allow you to position the GPU independently of the motherboard slots.