TRYX String 200mm PCIe 5.0 Alternatives: 6 Similar Picks Compared

How each alternative compares

LINKUP 25cm Right Angle PCIe 5.0 Riser Cable

The LINKUP 25cm Right Angle PCIe 5.0 Riser offers a 25cm length, which is slightly longer than the 200mm TRYX String. This extra length provides more flexibility for case layouts where the motherboard and GPU slots are not perfectly aligned. It uses a right-angle connector design, differing from the TRYX String’s straight configuration. This angle can simplify cable routing in compact vertical mounts. You get reliable Gen 5 performance with similar shielding standards. If your case requires a bit more slack for cable management, this option suits you. It maintains the high bandwidth needed for modern GPUs while adapting to tighter spatial constraints.

LINKUP 19cm Double Reverse PCIe 5.0 Riser Cable

The LINKUP 19cm Double Reverse PCIe 5.0 Riser is significantly shorter at 19cm compared to the 200mm TRYX String. It features a double reverse angle, a specific geometric design not found in the TRYX model. This configuration is ideal for ITX builds where space is extremely limited. You sacrifice length for a specialized form factor that fits tight vertical mounts. The PCIe 5.0 interface ensures you still get full bandwidth for your graphics card. If you are building a small form factor PC, this riser addresses unique clearance issues. It delivers stable performance in a compact package, making it a practical choice for enthusiasts with constrained chassis dimensions.

LINKUP 10cm Straight PCIe 5.0 Riser Cable

The LINKUP 10cm Straight PCIe 5.0 Riser Cable is much shorter than the 200mm TRYX String, measuring only 10cm. It retains the straight connector style, which may appeal to users who prefer direct alignments. This short length is best for vertical mounts where the distance between the motherboard and GPU is minimal. You get reliable Gen 5 speeds without the extra cable bulk. The trade-off is limited reach, so it only works in cases with very close slot spacing. If you prioritize signal integrity and a clean look in a tight space, this is a solid option. It avoids the complexity of angled connectors while providing necessary bandwidth for high-end graphics cards.

GLOTRENDS 150mm PCIe 5.0 Riser Cable

The GLOTRENDS 150mm PCIe 5.0 Riser Cable is shorter than the 200mm TRYX String, measuring 150mm. It uses a right-angle connector, which differs from the TRYX String’s straight design. This angle helps reduce cable strain in mid-tower cases where vertical mounting is common. You get reliable PCIe 5.0 performance suitable for most high-end GPUs. The shorter length may not fit all vertical setups, so check your case dimensions carefully. If you need a right-angle connection for better cable management in a mid-tower, this riser is a practical alternative. It provides adequate power delivery and signal stability without requiring the longer reach of the TRYX model.

Glotrends PA17 Straight PCIe 5.0 Riser

The GLOTRENDS PA17 Straight PCIe 5.0 Riser is designed for 1U or 2U rack servers, differing from the consumer-focused TRYX String. It measures 200mm, matching the length of the TRYX cable. However, its intended use is for server environments rather than standard desktop vertical mounts. You get stable passthrough for PCIe 5.0 systems in a rack setup. The lack of specific consumer mounting features makes it less suitable for typical PC cases. If you are building a rack server or need a straight 200mm riser for specialized hardware, this is a viable option. It prioritizes server compatibility over the aesthetic and mounting flexibility of the TRYX String.

ConnBull 150mm PCIe 5.0 Riser Cable

The ConnBull 150mm PCIe 5.0 Riser Cable is shorter than the 200mm TRYX String, measuring 150mm. It features a compact design suitable for vertical GPU mounting in tight spaces. You get Gen 5 speeds in a smaller form factor, which may not fit all cases. The cable requires six-slot clearance, a specific requirement not mentioned for the TRYX String. If you have a compact setup with water cooling and sufficient clearance, this riser works well. It offers reliable performance for modern graphics cards. The shorter length and specific clearance needs make it a niche choice. It is best for builders who need a shorter riser with high bandwidth in a constrained environment.

Quick picks

Our 7 picks

1 Best overall

TRYX String 200mm PCIe 5.0 Riser Cable

Best for: vertical GPU mounting with RTX 50 series

Interface Standard

PCIe 5.0

Slot Configuration

x16

Cable Length

200mm

Maximum Bandwidth

128GB/s

Shielding Type

EMI Shield

GPU

GeForce RTX 4090

View on Amazon: TRYX String 200mm PCIe 5.0 Riser Cable Affiliate link

The TRYX String is a 200mm PCIe 5.0 riser cable designed for vertical GPU mounting. It supports up to 128GB/s bidirectional bandwidth, which is twice the speed of PCIe 4.0. The cable features gold-plated connectors and enhanced electromagnetic shielding to reduce signal loss. You will find this riser suitable for RTX 50 and RX 9000 series graphics cards. It uses an ultra-flexible TPE jacket for easier installation in tight cases.

Pros

• Supports PCIe 5.0 x16 interface with 128GB/s bandwidth
• 200mm length ideal for vertical GPU mounting
• Gold-plated connectors for stable signal transmission
• Enhanced electromagnetic shielding reduces noise
• Validated for near-zero signal loss

Cons

• Only available in 200mm length
• No mention of included mounting bracket
• Limited to black or white color options

Good fit if

• You need a vertical GPU mount
• You use RTX 50 or RX 9000 series GPUs
• You want a 200mm cable length

Skip if

• You require a 300mm cable length
• You need a different color option
• You prefer a horizontal mounting solution

Verdict: The TRYX String 200mm PCIe 5.0 Riser fits builders who need a short, high-bandwidth cable for vertical GPU mounting. It delivers the necessary 128GB/s speed for modern graphics cards while keeping signal integrity high through shielding and gold plating.

2 Best premium

LINKUP 25cm Right Angle PCIe 5.0 Riser Cable

Best for: compact vertical GPU mounts with short cable needs

Interface Standard

PCIe 5.0

Slot Configuration

x16

Cable Length

25cm

Connector Angle

Right Angle

Maximum Bandwidth

128GB/s

Shielding Type

multilayer shielding

View on Amazon: LINKUP 25cm Right Angle PCIe 5.0 Riser Cable Affiliate link

This LINKUP riser cable offers a 25cm right-angle connector for vertical GPU mounting. It supports PCIe 5.0 x16 with 128GB/s bandwidth and multilayer shielding. The design fits towers, SFF cases, and open benches. You get backward compatibility with PCIe 4.0 and validation on modern workstations. It helps clear intake airflow for better cooling and a clean look.

Pros

• PCIe 5.0 x16 interface with 128GB/s maximum bandwidth
• 25cm cable length with right-angle connector
• Multilayer shielding to suppress crosstalk and EMI
• Backward compatible with PCIe 4.0 devices
• Validated for vertical GPU mounts in various cases

Cons

• Short 25cm length limits placement distance
• Right-angle connector may not fit all tight chassis layouts
• Does not include mounting brackets or standoffs

Good fit if

• You need a short riser for vertical GPU mounting
• You use a standard tower or SFF case with close slot proximity
• You want PCIe 5.0 bandwidth for future GPUs

Skip if

• You require a longer cable for distant GPU placement
• You need a straight or left-angle connector
• You are using a PCIe 3.0 or 4.0 motherboard without Gen 5 support

Verdict: LINKUP 25cm Right Angle PCIe 5.0 Riser provides reliable Gen 5 performance for compact vertical builds. It suits users with tight case layouts who need a short, shielded connection for their GPU.

3 Also great

LINKUP 19cm Double Reverse PCIe 5.0 Riser Cable

Best for: ITX vertical GPU mounts with tight space

Interface Standard

PCIe 5.0

Slot Configuration

x16

Cable Length

19cm

Connector Angle

Double Reverse

Maximum Bandwidth

128GB/s

Shielding Type

multilayer shielding

View on Amazon: LINKUP 19cm Double Reverse PCIe 5.0 Riser Cable Affiliate link

This LINKUP PCIe 5.0 riser cable features a 19cm length and double reverse connector angle. It supports 128GB/s bandwidth on x16 slots with multilayer shielding. The design suits vertical GPU mounts in ITX or SFF cases. You get backward compatibility with PCIe 4.0 devices. This cable helps manage airflow and aesthetics in tight builds.

Pros

• 19cm cable length for compact layouts
• Double reverse connector angle
• 128GB/s PCIe 5.0 x16 bandwidth
• Multilayer shielding for signal integrity

Cons

• 19cm length may be short for some cases
• Double reverse angle limits routing flexibility
• No mention of included mounting brackets

Good fit if

• You need a double reverse connector for your case
• You are building an ITX or SFF PC
• You want PCIe 5.0 support for future GPUs

Skip if

• You require a longer cable than 19cm
• You need a straight or right-angle connector
• You are using a standard ATX tower with ample space

Verdict: LINKUP 19cm Double Reverse PCIe 5.0 Riser fits ITX builders who need a specific double reverse angle. It delivers full PCIe 5.0 speeds in a compact form factor.

4 Also great

LINKUP 10cm Straight PCIe 5.0 Riser Cable

Best for: Short vertical GPU mounts with standard cases

Interface Standard

PCIe 5.0

Slot Configuration

x16

Cable Length

10cm

Connector Angle

Straight

Maximum Bandwidth

128GB/s

Shielding Type

multilayer shielding

View on Amazon: LINKUP 10cm Straight PCIe 5.0 Riser Cable Affiliate link

This LINKUP PCIe 5.0 riser cable features a straight connector and measures 10cm. It supports x16 slots with a maximum bandwidth of 128GB/s. Multilayer shielding helps suppress crosstalk and EMI. You can use it for vertical GPU mounts in towers, SFF cases, or open benches. The design aims for clean eye margins under load. It is backward-compatible with PCIe 4.0 and validated on WRX80SE and WRX90E boards.

Pros

• Supports full 128GB/s bandwidth on PCIe 5.0 x16
• Includes multilayer shielding to suppress crosstalk and EMI
• Straight connector angle for standard mounting layouts
• Backward-compatible with PCIe 4.0 devices
• Validated for next-gen cards like RTX 5090

Cons

• Short 10cm length limits placement flexibility
• Requires separate standoffs and support brackets
• Straight angle may not fit tight vertical mounts

Good fit if

• You need a short extension for a vertical GPU mount
• You have a standard tower case layout
• You want multilayer shielding for signal integrity

Skip if

• You require a longer cable for distant GPU placement
• You need a right-angle connector for tight spaces
• You want a bracket included in the box

Verdict: LINKUP Vertical PCIe 5.0 Riser 10cm offers reliable Gen5 performance for builders with short vertical mount distances. It suits users who prioritize signal shielding and standard straight connections over included mounting hardware.

5 Also great

GLOTRENDS 150mm PCIe 5.0 Riser Cable

Best for: mid-tower vertical GPU mounts

Interface Standard

PCIe 5.0

Slot Configuration

x16

Cable Length

150mm

Connector Angle

90 Degree Right Angle

Maximum Bandwidth

64GB/s

Shielding Type

individually foil-wrapped

View on Amazon: GLOTRENDS 150mm PCIe 5.0 Riser Cable Affiliate link

This GLOTRENDS riser cable is 150mm long with a 90-degree right-angle connector, designed for vertical GPU mounts in mid-tower cases. It supports PCIe 5.0 x16 bandwidth up to 64GB/s and delivers 78W of power via a 40-pin connector. The cable uses 30AWG silver-plated copper conductors with individually foil-wrapped shielding for signal integrity. It is backward compatible with PCIe 4.0 and 3.0 standards.

Pros

• 150mm length ideal for standard mid-tower vertical mounts
• 90-degree right-angle connector for tidy routing
• Supports PCIe 5.0 x16 with up to 64GB/s bandwidth
• 40-pin connector delivers 78W power for flagship GPUs
• Individually foil-wrapped shielding for EMI protection

Cons

• 150mm length may be too short for deep cases
• Right-angle connector limits orientation flexibility
• No external power adapter included for higher wattage needs

Good fit if

• You need a compact riser for a mid-tower case
• You require a right-angle connector for clean cable management
• You want PCIe 5.0 support for future-proofing

Skip if

• You need a longer cable for deep cases
• You prefer a straight connector for direct mounting
• You require external power delivery for extreme overclocking

Verdict: GLOTRENDS 150mm PCIe 5.0 Right Angle Riser is a solid choice for users with mid-tower cases who need a right-angle connection. It provides reliable PCIe 5.0 performance and adequate power delivery for most high-end GPUs.

6 Best budget

Glotrends PA17 Straight PCIe 5.0 Riser

Best for: 1U/2U rack server PCIe 5.0 expansion

Interface Standard

PCIe 5.0

Slot Configuration

x16

Connector Angle

Straight Angle

Weight

1.76 ounces

View on Amazon: Glotrends PA17 Straight PCIe 5.0 Riser Affiliate link

The GLOTRENDS PA17 is a straight-angle PCIe 5.0 x16 riser adapter card designed for 1U or 2U rack servers. It raises the motherboard slot by 200mm to clear shrouds and drive cages. The card passes signals straight through without enhancement. It works with PCIe 4.0 and 3.0 devices but runs at the lowest common speed. You need a full PCIe 5.0 system for maximum bandwidth. It weighs 1.76 ounces.

Pros

• Supports PCIe 5.0 x16 full bandwidth
• 200mm height clears adjacent components
• Backward compatible with PCIe 4.0 and 3.0
• Straight angle design for 1U/2U racks

Cons

• Requires powering off for installation
• No signal enhancement or conversion
• Limited to straight angle style

Good fit if

• You use 1U or 2U rack servers
• You need to clear drive cages
• You require a straight angle riser

Skip if

• You need hot-plugging support
• You want a right angle design
• You need signal enhancement

Verdict: The GLOTRENDS PA17 PCIe 5.0 Riser fits users who need a 200mm straight riser for rack servers. It provides stable passthrough for PCIe 5.0 systems without adding complexity.

7

ConnBull 150mm PCIe 5.0 Riser Cable

Best for: compact vertical GPU mounting with Gen 5 speed

Interface Standard

PCIe 5.0

Slot Configuration

16X

Cable Length

150mm

Maximum Bandwidth

128GB/s

Dimensions

6.69 × 5.12 × 0.79 inches

Weight

4.16 ounces

View on Amazon: ConnBull 150mm PCIe 5.0 Riser Cable Affiliate link

The ConnBull 150mm PCIe 5.0 riser cable connects your GPU vertically while maintaining Gen 5 bandwidth. It supports 128GB/s transfer speeds over a 16x interface. The 150mm length fits tight ITX builds or standard cases with water cooling. It uses 29AWG wires for reliable signal integrity. You get a black cable that replaces older Gen 3 or 4 versions without performance loss.

Pros

• Supports PCIe 5.0 16x interface
• 128GB/s maximum bandwidth
• 150mm cable length for compact builds
• Compatible with RTX 4090 and RX 7900 XTX

Cons

• Requires at least six slots of vertical space
• May conflict with air-cooled radiators
• Backcase ribs can block display cables

Good fit if

• You need a Gen 5 riser for vertical mounting
• You use a water-cooled system to save space
• You have a case with enough vertical clearance

Skip if

• You only have space for a 90cm cable
• You use an air-cooled GPU that blocks the bracket
• Your case has rear ribs that block HDMI ports

Verdict: ConnBull 150mm PCIe 5.0 Riser fits users who need Gen 5 speeds in a compact vertical setup. It works well if you have the required six-slot clearance and use water cooling.

Specifications side by side

Frequently asked questions

See also

• milton 5 alternatives
• best motherboards with pcie 5 0