Looking Beyond the Thermaltake Dual 90° PCIe 4.0? 6 Alternatives Worth a Look

Key Differences in Alternatives

GLOTRENDS 200mm Right-Angle PCIe 4.0 Riser Cable

The GLOTRENDS option is significantly shorter at 200mm, making it ideal for mid-tower cases with minimal vertical distance. It uses foil shielding for EMI protection, which is slightly different from the Thermaltake’s specific EMI shielding design. This cable supports PCIe 4.0, matching the original’s bandwidth capabilities. You lose the dual 90-degree connector layout, opting for a standard right-angle design instead. This choice suits builders who prioritize a lower profile and sufficient signal integrity over the specific flat routing benefits of the Thermaltake model. It is a practical choice for standard vertical mounts where space is constrained.

LINKUP 15cm PCIe 5.0 Right Angle Riser Cable

The LINKUP 15cm model advances to PCIe 5.0, offering higher potential bandwidth than the Thermaltake’s PCIe 4.0 limit. However, it is much shorter at 15cm, which restricts its use to very compact builds. It features a single right-angle connector rather than the dual 90-degree design, simplifying the routing path. This cable is best for users with short vertical distances who need future-proof bandwidth. You give up the longer 400mm reach and the specific dual-angle layout for a more compact, high-speed solution. It is suitable for tight ITX or small form factor builds where space is at a premium.

LINKUP 22cm ITX Double Reverse Riser Cable

This LINKUP 22cm riser supports PCIe 5.0, providing double the bandwidth of the Thermaltake’s PCIe 4.0 interface. It uses a double reverse connector design, which is distinct from the Thermaltake’s dual 90-degree layout. The 22cm length is shorter than the 400mm original, limiting it to compact ITX cases. This option is tailored for vertical GPU mounts in small form factor builds where specific connector orientation is required. You gain higher bandwidth and a specialized connector type but sacrifice the longer cable length and standard right-angle routing. It is ideal for builders needing high-speed data transfer in a confined space.

LINKUP 15cm Straight PCIe 5.0 Riser Cable

The LINKUP 15cm straight riser supports PCIe 5.0, offering higher bandwidth than the Thermaltake’s PCIe 4.0 standard. It features a straight connector design, which differs from the dual 90-degree angled connectors of the original. The 15cm length is much shorter, making it unsuitable for builds requiring significant vertical distance. This cable is best for vertical GPU mounts where ample straight-line space is available. You gain higher bandwidth and a simpler straight routing path but lose the angled flexibility and longer reach. It is a good choice for users prioritizing raw speed and signal shielding in open vertical setups.

LINKUP Ultra PCIe 4.0 x16 Riser Cable 10cm

The LINKUP 10cm ultra-compact riser supports PCIe 4.0, matching the original’s bandwidth but with a much shorter 10cm length. It uses a straight connector design, differing from the Thermaltake’s dual 90-degree layout. This cable is designed for extreme space constraints, such as compact vertical GPU mounts. You gain a highly compact form factor but sacrifice the longer 400mm length and angled routing flexibility. It is suitable for users who need a stable connection in very tight spaces. The shorter length makes it less versatile for standard mid-tower cases compared to the original.

GIGA-MEGA 16cm PCIe 5.0 Riser Cable with Vertical Bracket

The GIGA-MEGA 16cm riser supports PCIe 5.0, offering higher bandwidth than the Thermaltake’s PCIe 4.0 interface. It includes a vertical bracket, which is not part of the original cable. The 16cm length is shorter, and it uses a right-angle design rather than the dual 90-degree layout. This option is best for vertical GPU mounts with limited horizontal space, particularly for users with water cooling setups. You gain PCIe 5.0 bandwidth and a bracket but lose the longer cable length and specific dual-angle routing. It is ideal for compact builds where horizontal space is restricted.

Quick picks

Our 7 picks

1 Best overall

Thermaltake Dual 90° PCIe 4.0 400mm Riser Cable

Best for: Compact vertical GPU mounts with dual 90° angles

Interface Standard

PCIe 4.0

Cable Length

400mm

Connector Angle

Dual 90-degree

Maximum Bandwidth

16Gbps

Shielding Type

EMI Shielding

Weight

9.52 ounces

View on Amazon: Thermaltake Dual 90° PCIe 4.0 400mm Riser Cable Affiliate link

This Thermaltake riser cable supports PCIe 4.0 with a maximum bandwidth of 16Gbps. It features dual 90-degree connectors and a 400mm length for compact vertical GPU mounting. EMI shielding helps maintain stable performance. You should choose this if you need a flat, space-efficient layout for AMD or Intel motherboards.

Pros

• Dual 90-degree connectors for flat cable management
• 16Gbps data transmission speed
• 400mm length minimizes bending
• EMI shielding for stability

Cons

• PCIe 4.0 standard limits future upgrades
• 400mm length is shorter than many alternatives
• 9.52 ounces is heavier than thin cables

Good fit if

• You need dual 90-degree connectors
• You want EMI shielding
• You prefer a compact 400mm length

Skip if

• You require PCIe 5.0 support
• You need a longer cable than 400mm
• You want a lighter cable under 5 ounces

Verdict: Thermaltake PCIe 4.0 Dual 90° Riser suits users needing a compact, shielded riser with dual right-angle connectors for vertical GPU mounting.

2 Best budget

GLOTRENDS 200mm Right-Angle PCIe 4.0 Riser Cable

Best for: Vertical GPU mounts in mid-tower cases

Interface Standard

PCIe 4.0

Slot Configuration

x16

Cable Length

200mm

Connector Angle

90 Degree Right Angle

Maximum Bandwidth

32GB/s

Shielding Type

foil-wrapped

View on Amazon: GLOTRENDS 200mm Right-Angle PCIe 4.0 Riser Cable Affiliate link

This GLOTRENDS riser cable offers a 200mm length with a 90-degree right angle connector, designed for vertical GPU mounts in standard mid-tower cases. It supports PCIe 4.0 x16 bandwidth up to 32GB/s and features individually foil-wrapped shielding for signal stability. The cable uses 30AWG silver-plated copper for reliable data transfer. You will need a CPU-direct PCIe 4.0 slot to achieve full speed, though it remains backward compatible with PCIe 3.0 setups.

Pros

• 200mm length provides extra slack for routing behind the motherboard tray
• Individually foil-wrapped shielding protects differential signal pairs from EMI
• Supports up to 32GB/s bandwidth on PCIe 4.0 x16 slots
• Backward compatible with PCIe 3.0 slots and older GPUs

Cons

• Limited to PCIe 4.0 speeds, unlike newer PCIe 5.0 alternatives
• Hot swapping is not supported for safe installation
• Requires a CPU-direct PCIe 4.0 slot for maximum bandwidth

Good fit if

• You need a 90-degree riser for a vertical GPU mount
• You are building in a standard mid-tower case
• You want EMI shielding for stable signal integrity

Skip if

• You require PCIe 5.0 bandwidth for next-gen GPUs
• You need hot-swappable functionality for frequent changes
• You are using an older setup limited to PCIe 3.0

Verdict: GLOTRENDS 200mm PCIe 4.0 Riser delivers stable signal integrity through foil shielding and sufficient length for mid-tower builds. It suits users prioritizing EMI protection and backward compatibility over the highest possible bandwidth standards.

3 Also great

LINKUP 15cm PCIe 5.0 Right Angle Riser Cable

Best for: Compact vertical GPU mounts

Interface Standard

PCIe 5.0

Slot Configuration

x16

Cable Length

15cm

Connector Angle

Right Angle

Maximum Bandwidth

128GB/s

Shielding Type

multilayer shielding

View on Amazon: LINKUP 15cm PCIe 5.0 Right Angle Riser Cable Affiliate link

This LINKUP riser cable connects a GPU vertically using a right-angle connector. It supports PCIe 5.0 x16 with a 128GB/s bandwidth limit. The 15cm length fits compact builds. Multilayer shielding reduces interference. It works with PCIe 4.0 and 5.0 boards. You get stable signal integrity for high-performance cards. The design helps manage airflow in tight cases.

Pros

• Supports PCIe 5.0 x16 interface
• 128GB/s maximum bandwidth
• Right-angle connector for vertical mounts
• Multilayer EMI shielding
• Backward compatible with PCIe 4.0

Cons

• Short 15cm cable length limits placement
• Only includes right-angle connector option
• Attributes list PCIe 4.0 interface despite Gen 5 title

Good fit if

• You need a right-angle vertical GPU mount
• You have a compact case with short distances
• You want PCIe 5.0 bandwidth headroom

Skip if

• You require a longer cable span
• You need a straight connector layout
• You are on a tight budget

Verdict: LINKUP PCIe 5.0 Right Angle Riser delivers Gen 5 bandwidth in a compact form. It suits builders with short vertical distances who need right-angle routing.

4 Best itx

LINKUP 22cm ITX Double Reverse Riser Cable

Best for: PCIe 5.0 ITX sandwich case builds

Interface Standard

PCIe 5.0

Slot Configuration

x16

Cable Length

22cm

Connector Angle

Double Reverse

Maximum Bandwidth

128GB/s

Shielding Type

multilayer shielding

View on Amazon: LINKUP 22cm ITX Double Reverse Riser Cable Affiliate link

This 22cm riser cable upgrades your GPU connection to PCIe 5.0 x16 speeds, delivering up to 128GB/s bandwidth while remaining backward-compatible with PCIe 4.0. Its ITX double reverse connector configuration is designed for compact sandwich cases and vertical mounts. Multilayer shielding manages electromagnetic interference across tight internal bends, giving you high-bandwidth headroom for modern motherboard slots and graphics cards.

Pros

• Full PCIe 5.0 x16 bandwidth rated up to 128GB/s
• Double reverse connector layout tailored for ITX sandwich enclosures
• Multilayer shielding suppresses EMI and crosstalk across tight bends
• Backward-compatible with PCIe 4.0 and PCIe 3.0 motherboards

Cons

• Fixed 22cm length limits routing options in large desktop cases
• Double reverse connector angle does not fit standard straight bracket setups

Good fit if

• You need PCIe 5.0 x16 throughput up to 128GB/s inside an ITX sandwich chassis.
• You require a double reverse connector orientation for your vertical GPU mount.
• You route cables through tight bends where multilayer shielding is essential.

Skip if

• You need a straight or single right-angle connector orientation for your chassis.
• You need more than 22cm of length to route across a large ATX case.

Verdict: LINKUP 22cm PCIe 5.0 Double Reverse Riser Cable provides maximum PCIe 5.0 bandwidth for builders assembling high-end GPUs inside compact ITX sandwich enclosures.

5 Best premium

LINKUP 15cm Straight PCIe 5.0 Riser Cable

Best for: Vertical GPU mounts with straight clearance

Interface Standard

PCIe 5.0

Slot Configuration

x16

Cable Length

15cm

Connector Angle

Straight

Maximum Bandwidth

128GB/s

Shielding Type

multilayer shielding

View on Amazon: LINKUP 15cm Straight PCIe 5.0 Riser Cable Affiliate link

This LINKUP riser cable offers PCIe 5.0 x16 connectivity with a maximum bandwidth of 128GB/s. The 15cm straight connector design suits vertical GPU mounts where space allows. Multilayer shielding helps suppress crosstalk and EMI for stable signals. It remains fully backward-compatible with PCIe 4.0 devices. You get a clean build option that supports next-generation graphics cards while maintaining reliable data transfer speeds.

Pros

• Supports full 128GB/s bandwidth on PCIe 5.0 x16
• Multilayer shielding reduces crosstalk and EMI
• Backward-compatible with PCIe 4.0 standards
• Straight connector ideal for specific vertical mounts

Cons

• Straight connector limits placement options compared to angled versions
• 15cm length may not reach all case configurations
• Data does not mention included support bracket

Good fit if

• You need a PCIe 5.0 riser with high bandwidth
• You have a vertical mount with sufficient straight-line clearance
• You want multilayer shielding for signal integrity

Skip if

• You require a 90-degree angled connector
• Your case needs a longer cable than 15cm
• You prefer PCIe 4.0 specific optimized cabling only

Verdict: LINKUP PCIe 5.0 15cm Straight Riser fits builders who prioritize raw bandwidth and signal shielding for vertical GPU setups with ample straight-line space. It is less suitable for cramped cases requiring angled routing.

6 Best gaming

LINKUP Ultra PCIe 4.0 x16 Riser Cable 10cm

Best for: compact vertical GPU mounting

Interface Standard

PCIe 4.0

Slot Configuration

X16

Cable Length

10cm

Connector Angle

Universal 90 Degree

Maximum Bandwidth

Over 64GB/s

Shielding Type

Individual laneway shielding

View on Amazon: LINKUP Ultra PCIe 4.0 x16 Riser Cable 10cm Affiliate link

This LINKUP riser cable offers a 10cm length with a 90-degree right-angle connector. It supports PCIe 4.0 x16 interfaces with over 64GB/s bandwidth. Individual laneway shielding helps prevent interference. The design includes dedicated power lines for signal integrity. It suits users needing compact vertical GPU mounts for high-end cards like the RTX 4090.

Pros

• 10cm cable length for tight spaces
• 90-degree right-angle connector
• PCIe 4.0 x16 interface
• Over 64GB/s bandwidth
• Individual laneway shielding

Cons

• Short 10cm length limits placement options
• Screws not recommended for mounting
• Sold as open box

Good fit if

• You need a short riser for compact cases
• You use a vertical GPU mount
• You require PCIe 4.0 performance

Skip if

• You need a longer cable reach
• You prefer a new sealed package
• You use PCIe 5.0 only

Verdict: LINKUP 10cm PCIe 4.0 Riser provides reliable signal integrity for vertical builds. It fits users who prioritize compact dimensions and stable connections for high-end graphics cards.

7 Best radeon rx 7900 xt

GIGA-MEGA 16cm PCIe 5.0 Riser Cable with Vertical Bracket

Best for: Vertical GPU mounts with limited horizontal space

Interface Standard

PCIe 5.0

Slot Configuration

x16

Cable Length

16cm

Connector Angle

Right Angle

Shielding Type

Aluminum shielded

GPU

Radeon RX 7900 XT

View on Amazon: GIGA-MEGA 16cm PCIe 5.0 Riser Cable with Vertical Bracket Affiliate link

The GIGA-MEGA riser cable supports PCIe 5.0 and 4.0 with a 16cm right-angle connection. It includes a vertical GPU mount bracket designed for heavy cards like the Radeon RX 7900 XT. The aluminum-shielded twinax ribbon cable offers flexibility and low loss. This kit requires at least six slot spaces and works with AMD, Nvidia, and Intel GPUs without BIOS adjustments.

Pros

• Supports PCIe 5.0 and 4.0 standards
• 16cm right-angle connector design
• Aluminum shielded twinax ribbon cable
• Includes vertical GPU mount bracket

Cons

• Requires six slot spaces for installation
• 16cm cable length is short
• May conflict with air-cooled radiators

Good fit if

• You need a right-angle connection for vertical GPU mounting
• You have a case with at least six slot spaces
• You use a water-cooled radiator to avoid conflicts

Skip if

• You require a cable longer than 16cm
• Your case has ribs blocking DP/HDMI ports
• You cannot allocate six slot spaces for the bracket

Verdict: GIGA-MEGA 16cm PCIe 5.0 Right Angle Riser is a compact solution for vertical GPU setups. It fits users with tight horizontal space who can accommodate a six-slot bracket and prefer water cooling.

Specifications side by side

Frequently asked questions

See also

• bykski dual distro plate thermaltake alternatives
• garmin striker plus 4 dual beam alternatives