Looking Beyond the GLOTRENDS 150mm PCIe 5.0 x16? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The GLOTRENDS 150mm PCIe 5.0 x16 riser cable offers a reliable 64GB/s bandwidth and 78W power delivery for vertical GPU mounts. If you are searching for glotrends 150mm pcie 5 0 x16 alternatives, you might need different dimensions or connector angles. This specific model uses a right-angle design and a 150mm length, which suits standard mid-tower cases but may not fit compact builds. Some users require longer runs or straight connectors to navigate tight chassis layouts.
The 6 alternatives listed here share core specifications like PCIe 5.0 interface support and x16 slot compatibility. You will find options with increased lengths, such as 25cm cables, for setups where the standard 150mm reach falls short. Other picks feature double reverse angles for mini-ITX sandwich cases or straight designs for rack servers. Each option maintains full Gen 5 speeds, ensuring stable signal integrity regardless of the physical form factor. You can select a variant that matches your specific case constraints while retaining the high bandwidth needed for modern graphics hardware.
Our top pick: GLOTRENDS 150mm PCIe 5.0 Riser Cable.
How Each Alternative Compares
LINKUP 25cm Right Angle PCIe 5.0 Riser Cable
The LINKUP 25cm Right Angle PCIe 5.0 Riser Cable offers 25cm of length, which is longer than the 150mm GLOTRENDS option. This extra reach helps in cases where the motherboard slot is further from the GPU mount. It supports up to 128GB/s bandwidth, doubling the 64GB/s limit of the GLOTRENDS cable. The 90-degree right-angle connector matches the GLOTRENDS layout for easy vertical installation. You get multilayer shielding for signal integrity, similar to the GLOTRENDS foil-wrapped design. This option is best if you need more slack for cable management but want the same connector angle. It weighs 5.29 ounces, so it is slightly heavier than the standard 150mm version. Choose this if your case layout requires extra distance between the PCIe slot and the graphics card.
LINKUP 19cm Double Reverse PCIe 5.0 Riser Cable
The LINKUP 19cm Double Reverse PCIe 5.0 Riser Cable uses a double reverse connector layout, unlike the 90-degree right angle of the GLOTRENDS cable. This specific design is built for compact mini-ITX sandwich cases where standard risers do not fit. It delivers full 128GB/s bandwidth, which is double the 64GB/s of the GLOTRENDS model. The 19cm length is shorter than the 150mm GLOTRENDS cable, making it suitable for tight spaces. It includes shielding to maintain signal stability. This option is ideal for builders with small form factor cases who need a specialized connector angle. It does not offer the right-angle bend of the GLOTRENDS cable, so routing depends on your case internals. Pick this if your motherboard and GPU are stacked vertically in a tight chassis.
LINKUP 10cm Straight PCIe 5.0 Riser Cable
The LINKUP 10cm Straight PCIe 5.0 Riser Cable is a straight design, differing from the 90-degree right angle of the GLOTRENDS cable. Its 10cm length is significantly shorter than the 150mm GLOTRENDS option, making it suitable for very compact builds. It supports PCIe 5.0 speeds for full bandwidth pass-through. The straight connector requires different routing compared to the right-angle GLOTRENDS cable. It is shielded to protect signal integrity over the short distance. This option is best for users with tight cases where a short, direct connection is possible. It lacks the flexibility of the right-angle bend, so you must ensure your case allows straight routing. Choose this if you need the shortest possible cable length and have the space for a straight connection.
Glotrends PA17 Straight PCIe 5.0 Riser
The Glotrends PA17 Straight PCIe 5.0 Riser is a straight connector, unlike the 90-degree right angle of the GLOTRENDS 150mm cable. It provides a 200mm extension, which is longer than the 150mm GLOTRENDS option. This length is designed for 1U or 2U rack servers where low-profile compatibility is key. It supports full PCIe 5.0 bandwidth for high-speed data transfer. The straight design requires different routing compared to the right-angle GLOTRENDS cable. It is heavier at 1.76 ounces, reflecting its specialized build for rack systems. This option is best for server builds or low-profile setups needing extra reach. It does not offer the right-angle bend, so you must verify your rack layout allows straight connections. Pick this if you need a longer straight extension for specialized hardware.
ConnBull 150mm PCIe 5.0 Riser Cable
The ConnBull 150mm PCIe 5.0 Riser Cable matches the 150mm length of the GLOTRENDS option, offering the same reach for vertical mounts. However, it supports up to 128GB/s bandwidth, double the 64GB/s of the GLOTRENDS cable. It uses a standard x16 interface for full compatibility with PCIe 5.0 GPUs. The compact 150mm size fits similar use cases as the GLOTRENDS cable. It is black in color, matching the GLOTRENDS aesthetic. This option is best if you need the same length but higher bandwidth potential. It does not specify power delivery details, so you should verify your GPU power needs. Choose this if you want a direct replacement with higher theoretical throughput. It is a solid alternative for compact installations requiring maximum data speed.
GLOTRENDS Double Reverse PCIe 5.0 Riser
The GLOTRENDS Double Reverse PCIe 5.0 Riser uses a double reverse layout, unlike the 90-degree right angle of the 150mm model. This design is tailored for Mini-ITX builds that require specific connector orientations. It supports PCIe 5.0 bandwidth for high-speed performance. The double reverse angle differs significantly from the right-angle GLOTRENDS cable, affecting how you route the cable. It is black in color, matching the original aesthetic. This option is best for builders with Mini-ITX cases needing a specialized layout. It does not offer the right-angle bend, so you must ensure your case supports double reverse routing. Pick this if your motherboard and GPU alignment requires a double reverse connection. It is a niche solution for specific small-form-factor configurations.
Quick picks
Our 7 picks
GLOTRENDS 150mm PCIe 5.0 Riser Cable
Best for: vertical GPU mounts in mid-tower cases
- Interface Standard
- PCIe 5.0
- Slot Configuration
- x16
- Cable Length
- 150mm
- Connector Angle
- 90 Degree Right Angle
- Maximum Bandwidth
- 64GB/s
- Shielding Type
- individually foil-wrapped
View on Amazon: GLOTRENDS 150mm PCIe 5.0 Riser Cable Affiliate link
This GPU riser cable connects your graphics card to a motherboard slot across a 150mm distance. It delivers full PCIe 5.0 x16 bandwidth up to 64GB/s and supplies up to 78W of power across dedicated 12V pins. The 90-degree connector helps you mount standard cards vertically in mid-tower cases without extra power cables or drivers. It suits you if you need a compact Gen 5 link.
Pros
- Supports full PCIe 5.0 x16 bandwidth up to 64GB/s
- Provides up to 78W power delivery via 10 dedicated 12V pins
- Individually foil-wrapped differential pairs with double grounding
- Uses 30AWG silver-plated copper conductors
Cons
- Fixed 150mm length lacks reach for larger cases
- Does not support hot swapping
- 90-degree angle does not fit straight-entry mounts
Good fit if
- You mount a GPU vertically inside a standard mid-tower case.
- You run a PCIe 5.0 x16 card requiring up to 64GB/s bandwidth.
- You want slide-on installation without external power cables.
Skip if
- You need a straight or reverse connector rather than a 90-degree angle.
- You need more than 150mm of routing distance to reach your slot.
Verdict: GLOTRENDS 150mm Right-Angle PCIe 5.0 Riser Cable delivers up to 64GB/s bandwidth and stable 78W power for vertical GPU setups in mid-tower chassis. It gives you a direct Gen 5 link without requiring drivers or secondary power cables.
LINKUP 25cm Right Angle PCIe 5.0 Riser Cable
Best for: vertical GPU builds needing extra cable length
- Interface Standard
- PCIe 5.0
- Slot Configuration
- x16
- Cable Length
- 25cm
- Connector Angle
- Right Angle
- Maximum Bandwidth
- 128GB/s
- Shielding Type
- multilayer shielding
View on Amazon: LINKUP 25cm Right Angle PCIe 5.0 Riser Cable Affiliate link
The LINKUP 25cm PCIe 5.0 x16 Right Angle Riser Cable gives you a longer 25cm span compared to standard 150mm options. It delivers full PCIe 5.0 x16 bandwidth up to 128GB/s and features multilayer shielding to prevent signal interference. This right-angle cable suits you if your vertical GPU mount or chassis layout requires extra reach between the motherboard slot and graphics card without dropping Gen5 transfer rates.
Pros
- Full PCIe 5.0 x16 bandwidth supporting up to 128GB/s
- Multilayer shielding suppresses EMI and crosstalk
- Extended 25cm length provides extra reach beyond 150mm
- Right-angle connector suits vertical GPU mounts
Cons
- 25cm span can create excess slack in tight 150mm layouts
- Mounting brackets and chassis standoffs are not included
Good fit if
- You need a 25cm cable because a standard 150mm riser is too short.
- You mount your GPU vertically using a right-angle connector.
- You require full PCIe 5.0 x16 throughput up to 128GB/s.
Skip if
- You need a compact 150mm span for a small-form-factor case.
- You require a straight or reverse-angle connector orientation.
Verdict: LINKUP 25cm PCIe 5.0 x16 Right Angle Riser Cable delivers full 128GB/s Gen5 speeds with extra length for builds where standard 150mm cables fall short. Its multilayer shielding and right-angle connector ensure stable throughput in vertical mounting setups.
LINKUP 19cm Double Reverse PCIe 5.0 Riser Cable
Best for: compact mini-ITX sandwich case graphics card mounts
- Interface Standard
- PCIe 5.0
- Slot Configuration
- x16
- Cable Length
- 19cm
- Connector Angle
- Double Reverse
- Maximum Bandwidth
- 128GB/s
- Shielding Type
- multilayer shielding
View on Amazon: LINKUP 19cm Double Reverse PCIe 5.0 Riser Cable Affiliate link
This is a 19cm PCIe 5.0 x16 riser cable built with a double reverse connector configuration. It delivers full 128GB/s bandwidth and uses multilayer shielding to protect against signal interference. The short run and reverse connectors are tailored for mini-ITX sandwich cases. If you want full Gen5 data rates in a tight chassis without managing extra cable bulk, this layout fits your build.
Pros
- Full PCIe 5.0 x16 support with up to 128GB/s bandwidth
- Double reverse connector designed for compact ITX sandwich layouts
- Multilayer shielding suppresses electromagnetic interference and crosstalk
- Backward compatible with PCIe 4.0 setups
Cons
- Fixed 19cm length is too short for standard mid-tower routing
- Double reverse orientation does not fit standard right-angle or straight brackets
Good fit if
- You build inside a small-form-factor or mini-ITX sandwich case.
- You need 128GB/s bandwidth for PCIe 5.0 hardware.
- You want multilayer shielding to maintain signal integrity through tight bends.
Skip if
- You need a standard right-angle or straight connector.
- You need a cable span longer than 19cm to reach your motherboard.
Verdict: LINKUP 19cm Double Reverse PCIe 5.0 Riser Cable delivers full 128GB/s bandwidth in a compact, shielded footprint. It is built specifically for small-form-factor cases that require reverse connector angles.
LINKUP 10cm Straight PCIe 5.0 Riser Cable
Best for: compact vertical GPU mounts with short distances
- Interface Standard
- PCIe 5.0
- Slot Configuration
- x16
- Cable Length
- 10cm
- Connector Angle
- Straight
- Maximum Bandwidth
- 128GB/s
- Shielding Type
- multilayer shielding
View on Amazon: LINKUP 10cm Straight PCIe 5.0 Riser Cable Affiliate link
This LINKUP AVA5 v2 riser cable offers a 10cm straight connection for PCIe 5.0 x16 devices. It delivers 128GB/s bandwidth with multilayer shielding to reduce interference. The design supports vertical GPU mounts in various case layouts. You get backward compatibility with PCIe 4.0 and validation on modern motherboards. This short length suits compact builds where the GPU sits close to the motherboard slot.
Pros
- PCIe 5.0 x16 interface with 128GB/s maximum bandwidth
- 10cm straight connector angle for specific case layouts
- Multilayer shielding suppresses crosstalk and EMI
- Backward compatible with PCIe 4.0 devices
Cons
- 10cm length is too short for distant GPU mounts
- Straight connector limits routing flexibility compared to angled options
- Does not include support brackets or standoffs
Good fit if
- You need a short 10cm extension for a vertical mount
- You prefer a straight connector for clean cable management
- Your case layout keeps the GPU close to the motherboard
Skip if
- You require a longer cable for distant GPU placement
- You need angled connectors for tight routing paths
- You want included support hardware for heavy cards
Verdict: LINKUP PCIe 5.0 10cm Straight Riser is a compact solution for builders who need a short, shielded connection. It fits users with tight cases who can route a straight cable without bending.
Glotrends PA17 Straight PCIe 5.0 Riser
Best for: 1U/2U rack servers needing 200mm straight extension
- Interface Standard
- PCIe 5.0
- Slot Configuration
- x16
- Connector Angle
- Straight Angle
- Weight
- 1.76 ounces
View on Amazon: Glotrends PA17 Straight PCIe 5.0 Riser Affiliate link
The Glotrends PA17 is a straight-angle PCIe 5.0 x16 riser adapter card designed for 1U or 2U rack servers. It raises the slot height by 200mm to clear shrouds and drive cages. The card provides full bandwidth pass-through without signal enhancement. It weighs 1.76 ounces and supports backward compatibility with PCIe 4.0 and 3.0 devices. You need this if your system requires a straight, low-profile extension.
Pros
- Provides full PCIe 5.0 x16 bandwidth pass-through
- 200mm slot height clears adjacent components and shrouds
- Backward compatible with PCIe 4.0 and 3.0 devices
- Low-profile design suitable for 1U or 2U rack servers
Cons
- Requires power off and unplug for installation as it lacks hot-plugging
- Only available in straight angle, not right or left angle
- System must fully support PCIe 5.0 to reach maximum speeds
Good fit if
- You need a straight-angle riser for a 1U or 2U rack server
- You require a 200mm slot height to clear drive cages
- You are building a system with full PCIe 5.0 support
Skip if
- You need a right-angle or left-angle connection
- You require hot-plugging capability for the riser
- You are using a standard desktop case with limited height clearance
Verdict: Glotrends PA17 Straight PCIe 5.0 Riser is a specialized tool for rack-mounted systems needing a 200mm straight extension. It fits users who prioritize full bandwidth pass-through and low-profile compatibility over flexible angles.
ConnBull 150mm PCIe 5.0 Riser Cable
Best for: compact PCIe 5.0 x16 GPU installations
- Interface Standard
- PCIe 5.0
- Slot Configuration
- 16X
- Cable Length
- 150mm
- Maximum Bandwidth
- 128GB/s
- Dimensions
- 6.69 × 5.12 × 0.79 inches
- Weight
- 4.16 ounces
View on Amazon: ConnBull 150mm PCIe 5.0 Riser Cable Affiliate link
This ConnBull riser cable connects your graphics card across a 150mm distance using the PCIe 5.0 standard. It provides a full x16 slot configuration and delivers up to 128GB/s of maximum bandwidth to maintain fast GPU throughput. The cable measures 6.69 inches long and weighs 4.16 ounces in a black finish. If you need a compact 150mm extension for your high-speed expansion card setup, this provides direct spec parity for your build.
Pros
- Supports PCIe 5.0 standard with up to 128GB/s bandwidth
- Full x16 slot configuration
- Compact 150mm cable length
- Reinforced cable build with sturdy connector
Cons
- Short 150mm length limits reach across larger chassis
- No integrated right-angle mounting bracket listed
Good fit if
- You need a 150mm PCIe 5.0 x16 extension cable.
- You require up to 128GB/s transfer speeds for your GPU.
Skip if
- You need a cable run longer than 150mm.
- You require a right-angle or double-reverse connector configuration.
Verdict: ConnBull 150mm PCIe 5.0 x16 Riser Cable delivers up to 128GB/s bandwidth across a compact 150mm reach for full-bandwidth Gen 5 hardware. It is a direct match if you need a short x16 card link.
GLOTRENDS Double Reverse PCIe 5.0 Riser
Best for: Mini-ITX builds requiring double reverse layout
- Interface Standard
- PCIe 5.0
- Slot Configuration
- x16
- Cable Length
- 185mm
- Connector Angle
- double reverse
- Maximum Bandwidth
- 64GB/s
- Shielding Type
- individually foil-wrapped
View on Amazon: GLOTRENDS Double Reverse PCIe 5.0 Riser Affiliate link
This GLOTRENDS riser cable features a double reverse design for Mini-ITX builds. It supports PCIe 5.0 x16 with theoretical bandwidth of 64GB/s. The cable uses 30AWG silver-plated copper and includes advanced EMI shielding for signal integrity. It provides 78W of power delivery via a 40-pin connector. You need Intel 13th Gen or Ryzen 8700 CPUs and compatible GPUs to achieve full speed.
Pros
- Double reverse angle for Mini-ITX GPU mounting
- PCIe 5.0 x16 interface with 64GB/s theoretical speed
- 78W power delivery via 40-pin connector
- EMI shielding with foil-wrapped signal pairs
Cons
- Requires specific high-end CPUs for PCIe 5.0 speeds
- Requires RTX 50 Series or RX 9000 Series GPUs
- Limited to Mini-ITX form factor compatibility
Good fit if
- You are building a Mini-ITX PC
- You need a double reverse cable angle
- You have compatible high-end hardware
Skip if
- You use a standard ATX motherboard
- You have older generation CPUs
- You need PCIe 4.0 compatibility only
Verdict: GLOTRENDS Double Reverse PCIe 5.0 Riser is a specialized solution for Mini-ITX builders who require a double reverse cable layout and have the necessary high-end components to utilize PCIe 5.0 bandwidth.
Specifications side by side
| Spec | GLOTRENDS 150mm PCIe 5.0 Riser Cable | LINKUP 25cm Right Angle PCIe 5.0 Riser Cable | LINKUP 19cm Double Reverse PCIe 5.0 Riser Cable | LINKUP 10cm Straight PCIe 5.0 Riser Cable | Glotrends PA17 Straight PCIe 5.0 Riser | ConnBull 150mm PCIe 5.0 Riser Cable | GLOTRENDS Double Reverse PCIe 5.0 Riser |
|---|---|---|---|---|---|---|---|
| Interface Standard | PCIe 5.0 | PCIe 5.0 | PCIe 5.0 | PCIe 5.0 | PCIe 5.0 | PCIe 5.0 | PCIe 5.0 |
| Slot Configuration | x16 | x16 | x16 | x16 | x16 | 16X | x16 |
| Cable Length | 150mm | 25cm | 19cm | 10cm | not stated | 150mm | 185mm |
| Connector Angle | 90 Degree Right Angle | Right Angle | Double Reverse | Straight | Straight Angle | not stated | double reverse |
| Maximum Bandwidth | 64GB/s | 128GB/s | 128GB/s | 128GB/s | not stated | 128GB/s | 64GB/s |
| Shielding Type | individually foil-wrapped | multilayer shielding | multilayer shielding | multilayer shielding | not stated | not stated | individually foil-wrapped |
| Interface | PCIe 5.0 | PCIe 4.0 | PCIe 4.0 | PCIe 4.0 | PCIe 5.0 | PCIe 5.0 | PCIe 5.0 |
| Form Factor | not stated | not stated | ITX | not stated | not stated | not stated | ITX |
| Weight | not stated | 5.29 ounces | not stated | not stated | 1.76 ounces | 4.16 ounces | not stated |
| Dimensions | not stated | not stated | not stated | not stated | not stated | 6.69 × 5.12 × 0.79 inches | not stated |
| Size | 150mm | 25cm - v4 | 19cm - v2 | 10cm - v2 | not stated | 150 mm | not stated |
| Color | Black | All Black | Black | Black | not stated | Black | Black |
| Model | PCIE50-X16-150MM-0090D-Black | AG-P5-33SR-025BK | AVA5 | AVA5 v2 | PA17 | PCIE5.0-15CM | not stated |
If your system build requires compatible power delivery, you can compare msi mag a750gl pcie 5 alternatives.
Frequently asked questions
Are all these alternatives compatible with PCIe 5.0 motherboards?
Yes, every listed product supports the PCIe 5.0 interface. This ensures you get the full bandwidth potential of modern graphics cards. You do not need to worry about backward compatibility issues, as these cables are designed to work with current generation hardware standards.
Which riser is best for a mini-ITX sandwich case?
The LINKUP 19cm Double Reverse PCIe 5.0 Riser Cable is built specifically for small-form-factor cases. It features a double reverse connector angle that fits the tight constraints of mini-ITX sandwich layouts. This design allows you to mount your GPU vertically without cable interference.
Do any of these cables require external power?
The GLOTRENDS 150mm Right-Angle PCIe 5.0 Riser Cable does not require secondary power cables. It delivers stable 78W power directly through the connection. Other models in this list focus on data bandwidth and shielding, but you should check specific product details for power delivery specs.
What is the maximum bandwidth these cables support?
Most alternatives in this list deliver up to 128GB/s of bandwidth. This includes the LINKUP 25cm, 19cm, and 10cm models, as well as the ConnBull 150mm cable. The GLOTRENDS 150mm Right-Angle model offers up to 64GB/s. These speeds match the PCIe 5.0 x16 standard.
Is there a straight cable option for rack servers?
Yes, the Glotrends PA17 Straight PCIe 5.0 Riser is designed for rack-mounted systems. It provides a 200mm straight extension suitable for 1U or 2U rack servers. This model prioritizes full bandwidth pass-through and low-profile compatibility over flexible connector angles.
Which cable offers the most shielding for stability?
The LINKUP 25cm Right Angle PCIe 5.0 Riser Cable features multilayer shielding. This construction ensures stable throughput in vertical mounting setups. Shielding helps reduce interference, which is critical for maintaining the high speeds offered by PCIe 5.0 connections in dense computer cases.
Can I use these for vertical GPU mounts?
Several options are ideal for vertical GPU mounts. The GLOTRENDS 150mm Right-Angle and LINKUP 25cm Right Angle models are specifically noted for this use. The LINKUP 10cm Straight model also fits users with tight cases who need a short, shielded connection for vertical setups.